Powered by Universal Speech Solutions LLC

 MRCP

Yandex SR Plugin

Administrator Guide

 

Revision: 4

Distribution: Red Hat / Cent OS

Created: December 22, 2018

Last updated: March 16, 2021

Author: Arsen Chaloyan


 

Table of Contents

                     

1  Overview.. 3

1.1         Applicable Versions 3

1.2         Supported Distributions. 3

1.3         Authentication. 3

2  Installing RPMs Using YUM.. 4

2.1         Repository Configuration. 4

2.2         Repository Verification. 4

2.3         Yandex SR Plugin Installation. 5

3  Installing RPMs Manually. 6

3.1         Package List 6

3.2         Package Installation Order 7

4  Obtaining License. 9

4.1         License Type. 9

4.2         Node Information. 9

4.3         License Installation. 9

5  Obtaining Service Credentials. 10

5.1         Service Subscription. 10

5.2         Installation of Credentials 10

6  Configuring Server and Plugin. 11

6.1         Plugin Factory Configuration. 11

6.2         Logger Configuration. 11

6.3         Yandex SR Plugin Configuration. 11

7  Validating Setup. 12

7.1         Setting up Folder ID.. 12

7.2         Launching Server 12

7.3         Launching Client 13

 


 

1       Overview

This guide describes how to obtain and install binary packages for the Yandex Speech Recognition (SR) plugin to plugin to the UniMRCP server on Red Hat-based Linux distributions. The document is intended for system administrators and developers.

1.1      Applicable Versions

Instructions provided in this guide are applicable to the following versions.

 

UniMRCP 1.6.0 and above

UniMRCP Yandex SR Plugin 1.0.0 and above

1.2      Supported Distributions

UniMRCP RPMs are currently available for x86_64 (64-bit) architecture only.

 

Operating System

Released

End of Support

Red Hat / Cent OS 7

December 2018

TBA

Red Hat / Cent OS 8

January 2021

TBA

 

Note: packages for other distributions can be made available upon request. For more information, contact services@unimrcp.org.

1.3      Authentication

UniMRCP binary packages are available to authenticated users only. In order to register a free account with UniMRCP, please visit the following page.

 

https://www.unimrcp.org/profile-registration

 

Note: a new account needs to be verified and activated prior further proceeding.

 

2       Installing RPMs Using YUM

Using the Yellowdog Updater, Modifier (yum), a command-line package management utility for Red Hat-based distributions, is recommended for installation of UniMRCP binary packages.

2.1      Repository Configuration

The content of a typical yum configuration file, to be placed in /etc/yum.repos.d/unimrcp.repo, is provided below.

 

[unimrcp]

name=UniMRCP Packages for Red Hat / Cent OS-$releasever $basearch

baseurl=https://username:password@unimrcp.org/repo/yum/main/rhel$releasever/$basearch/

enabled=1

sslverify=1

gpgcheck=1

gpgkey=https://unimrcp.org/keys/unimrcp-gpg-key.public

 

[unimrcp-noarch]

name=UniMRCP Packages for Red Hat / Cent OS-$releasever noarch

baseurl=https://username:password@unimrcp.org/repo/yum/main/rhel$releasever/noarch/

enabled=1

sslverify=1

gpgcheck=1

gpgkey=https://unimrcp.org/keys/unimrcp-gpg-key.public

 

The username and password fields included in the HTTPS URI must be replaced with the corresponding account credentials.

2.2      Repository Verification

In order to verify that yum can properly connect and access the UniMRCP repository, the following command can be used.

 

yum repolist unimrcp

yum repolist unimrcp-noarch

 

where unimrcp and unimrcp-noarch are names of the sections set in the yum configuration file above.

 

In order to retrieve a list of packages the UniMRCP repository provides, the following command can be used.

 

yum --disablerepo="*" --enablerepo="unimrcp" list available

yum --disablerepo="*" --enablerepo="unimrcp-noarch" list available

 

2.3      Yandex SR Plugin Installation

In order to install the Yandex SR plugin, including all the dependencies, use the following command.

 

yum install unimrcp-yandex-sr

 

In order to install the additional data files for the sample client application umc, the following command can be used.

 

yum install umc-addons

 

Note: this package is optional and provides additional data which can be used for validation of basic setup.

3       Installing RPMs Manually

UniMRCP RPM packages can be installed manually using the rpm utility. Note, however, that the system administrator should take care of package dependencies and install all the packages in appropriate order.

 

The RPM packages have the following naming convention:

 

$packagename-$universion-$packageversion.el$rhelversion.$arch.rpm

 

where

·         packagename is the name of a package

·         universion is the UniMRCP version

·         packageversion is the RPM release version

·         rhelversion is the Red Hat version

·         arch is the architecture (x86_64, i686, …)

3.1      Package List

The following is a list of UniMRCP RPM packages required for the installation of the Yandex SR plugin.

 

Package Name

Description

unimrcp-yandex-sr

Yandex SR plugin to the server.

unigrpc

UniMRCP edition of the gRPC library.

unilibevent

UniMRCP edition of the libevent library.

umc-addons

Sample en-US data files used with umc. [Optional]

unilicnodegen

Node information retrieval tool, required for license deployment.

unimrcp-server

Shared library and application of the server.

unimrcp-client

Shared libraries and sample applications of the client. [Optional]

unimrcp-demo-plugins

Set of demo plugins to the server. [Optional]

unimrcp-common

Data common for the client and the server.

uniapr

UniMRCP edition of the Apache Portable Runtime (APR) library.

uniapr-util

UniMRCP edition of the Apache Portable Runtime Utility (APR-Util) library.

unisofia-sip

UniMRCP edition of the Sofia SIP library.

 

3.2      Package Installation Order

Note that all the RPM packages provided by UniMRCP are signed by a GNU Privacy Guard (GPG) key. Before starting the installation, you may need to import the public key in order to allow the rpm utility to verify the packages.

 

rpm --import https://unimrcp.org/keys/unimrcp-gpg-key.public

 

Packages for the APR, APR-Util and Sofia-SIP libraries must be installed first.

 

rpm -ivh uniapr-$aprversion-$packageversion.el$rhelversion.$arch.rpm

rpm -ivh uniapr-util-$apuversion-$packageversion.el$rhelversion.$arch.rpm

rpm -ivh unisofia-sip-$sofiaversion-$packageversion.el$rhelversion.$arch.rpm

 

Then, a package containing common data for the client and the server, and a package for the server should follow.

 

rpm -ivh unimrcp-common-$universion-$packageversion.el$rhelversion.$arch.rpm

rpm -ivh unimrcp-server-$universion-$packageversion.el$rhelversion.$arch.rpm

 

Next, a package containing the utility tool unilicnodegen, required for license deployment.

 

rpm -ivh unilicnodegen-$toolversion-$packageversion.el$rhelversion.$arch.rpm

 

Next, packages containing the gRPC and libevent libraries.

 

rpm -ivh unigrpc-$grpcversion-$packageversion.el$rhelversion.$arch.rpm

rpm -ivh unilibevent-$libeventversion-$packageversion.el$rhelversion.$arch.rpm

 

Finally, a package containing the Yandex SR plugin should follow.

 

rpm -ivh unimrcp-yandex-sr-$universion-$packageversion.el$rhelversion.noarch.rpm

 

4       Obtaining License

The Yandex SR plugin to the UniMRCP server is a commercial product, which requires a license file to be installed.

4.1      License Type

The following license types are available:

·         Trial

·         Production

·         Test and Development

4.2      Node Information

The license files are bound to a node the product is installed on. In order to obtain a license, the corresponding node information needs to be retrieved and submitted for generation of a license file.

 

Use the installed tool unilicnodegen to retrieve the node information.

 

/opt/unimrcp/bin/unilicnodegen

 

As a result, a text file uninode.info will be saved in the current directory. Submit the file uninode.info for license generation to services@unimrcp.org by mentioning the product name in the subject.

4.3      License Installation

The license file needs to be placed into the directory /opt/unimrcp/data.

 

cp umsyandexsr_*.lic /opt/unimrcp/data

5       Obtaining Service Credentials

In order to utilize the Yandex SpeechKit API, corresponding service credentials need to be retrieved from the Yandex Cloud portal and further installed to the UniMRCP server.

5.1      Service Subscription

Subscribe to the Yandex Speech to Text API.

 

https://cloud.yandex.com/docs/speechkit/concepts/auth

 

Obtain your OAuth token.

 

1.       Log in to Yandex using your Yandex Passport account.

2.       Get an OAuth token from Yandex OAuth. To do this, follow the link, click Allow and copy the issued OAuth token.

 

5.2      Installation of Credentials

Create a text file yandex.subscription.key in the directory /opt/unimrcp/data.

 

sudo nano /opt/unimrcp/data/yandex.subscription.key

 

Store your OAuth token in the text file.

 

***********************************

 

The provided OAuth token is used to obtain and periodically revalidate an IAM token.

 

6       Configuring Server and Plugin

6.1      Plugin Factory Configuration

In order to load the Yandex SR plugin into the UniMRCP server, open the file unimrcpserver.xml, located in the directory /opt/unimrcp/conf, and add the following entry under the XML element <plugin-factory>. Disable other recognition plugins, if available. The remaining demo plugins might also be disabled, if not installed.

 

  <!-- Factory of plugins (MRCP engines) -->

  <plugin-factory>

      <engine id="Demo-Synth-1" name="demosynth" enable="true"/>

      <engine id="Demo-Recog-1" name="demorecog" enable="false"/>

      <engine id="Demo-Verifier-1" name="demoverifier" enable="true"/>

      <engine id="Recorder-1" name="mrcprecorder" enable="true"/>

      <engine id="Yandex-SR-1" name="umsyandexsr" enable="true"/>

  </plugin-factory>

 

6.2      Logger Configuration

In order to enable log output from the plugin and set filtering rules, open the configuration file logger.xml, located in the directory /opt/unimrcp/conf, and add the following entry under the element <sources>.

 

    <source name=" YANDEXSR-PLUGIN" priority="INFO" masking="NONE"/>

 

6.3      Yandex SR Plugin Configuration

The configuration file of the plugin is located in /opt/unimrcp/conf/umsyandexsr.xml. Default settings should be sufficient for general use.

 

Refer to the Usage Guide for more information.

 

7       Validating Setup

Validate your setup by using the sample UniMRCP client and server applications on the same host. The default configuration and data files should be sufficient for a basic test.

7.1      Setting up Folder ID

The Yandex SpeechKit folder identifier must be specified in the configuration file of the plugin, located in /opt/unimrcp/conf/umsyandexsr.xml.

 

   <streaming-recognition

      folder-id="****************"

      single-utterance="true"

      interim-results="true"

      start-of-input="service-originated"

      language="en-US"

      max-alternatives="1"

      alternatives-below-threshold="false"

      confidence-format="auto"

      results-indent="2"

      skip-unsupported-grammars="true"

      transcription-grammar="transcribe"

      auth-validation-period="3600"

   />  

 

7.2      Launching Server

Start the UniMRCP server as a service.

 

systemctl start unimrcp

 

In the server log output, check whether the plugin is normally loaded.

 

[INFO]   Load Plugin [Yandex-SR-1] [/opt/unimrcp/plugin/umsyandexsr.so]

 

Next, check for the license information.

 

[NOTICE] UniMRCP YandexSR License

 

-product name:    umsyandexsr

-product version: 1.0.0

-license owner:   -

-license type:    trial

-issue date:      2018-12-22

-exp date:        2019-01-21

-channel count:   2

-feature set:     0

 

7.3      Launching Client

Note: the optional package umc-addons must be installed for this test to work.

 

Launch the sample UniMRCP client application umc.

 

cd /opt/unimrcp/bin

./umc

 

Run a typical speech recognition scenario by issuing the command run gsr1 from the console of the umc client application.

 

run gsr2

 

This command sends a RECOGNIZE request to the server and then starts streaming a sample audio input file callsteve.pcm to recognize.

 

Check for the NLSML results to be returned as expected.

 

<?xml version="1.0"?>

<result>

  <interpretation grammar="command" confidence="1">

    <instance>Dial 5</instance>

    <input mode="speech">Dial 5</input>

  </interpretation>

</result>

 

Visually inspect the log output for any possible warnings or errors.

 

Note that utterances are stored in the var directory, if the corresponding parameter is enabled in the configuration file umsyandexsr.xml and/or requested by the client.